MPCH250 Magnetic Pipe Centering Head
Abbreviations and Conventions used Storewide
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested maximum pull force against a 10mm thick grinded finish mild steel plate (ideal conditions). The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.
[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force]
It may be noted that most of our raw magnet products are magnetised through the Z axis (axial). While other directions (through Length 'L' or Width 'W') are equally possible, the most common construction is magnetisation axially (which we refer to as H or T)
Dimensional tolerances
Typical dimensional tolerances for sintered magnets (depending on size and complexity are as follows
Neodymium (NdFeB) : ± 0.1
Samarium (SmCo) : ± 0.1
Ferrite / Ceramic : ± 0.2
AlNiCo : ± 0.01
- Perfect tool for marking pipes 2-10" in diameter. Designed to precisely mark center points both on the interior and exterior of pipes
- The adjustable dial bubble protractor, crafted in anodized aluminium, is graduated in 2.5° increments to ensure precise measurements
- The 360° rotatable dial boasts an integrated vial, guaranteeing level accuracy. Additionally, integrated magnets allow this tool to secure itself at any desired angle on steel pipes
- Machined from top-tier aluminum material and anodized for lasting protection against the elements. This tool proves invaluable for identifying crucial pipe angles, such as top dead center and bottom dead center, facilitating a variety of pipe work
- For added convenience, this kit includes a sturdy hard case, delivering optimal protection and portability
Quantity Discounts Automatically Computed at Checkout
| Qty 5–49 | Level 1 | 5% off |
| Qty 50–199 | Level 2 | 10% off |
| Qty 200–499 | Level 3 | 12% off |
| Qty 500–999 | Level 4 | 15% off |
| Qty 1000–1499 | Level 5 | 20% off |
| Qty 1500–1999 | Level 6 | 25% off |
| Qty 2000–2999 | Level 7 | 30% off |
| Qty 3000–4999 | Level 8 | 35% off |
| Qty ≥ 5000 | Contact us for a bulk pricing quote |
RoHS, REACH Compliant | ISO 2859-1 Qualified
For every successful order you place online from here, we commit to a 2x2x2 ESG policy. 2 Trees planted, 2 Kgs of CO2 Offset and 2 Plastic bottles rescued. All on your behalf, at our cost.
Initiated in January 2024, see our progress so far by clicking the link below.