Skip to content

Country

Click to Whatsapp

Operating extended hours on Whatsapp. No calls.

Ringing Telephone Icon
Click to Call

Follow GMT+8 hours, M-F:10am to 6pm

Click to Email

Replies usually within 24 hours.

The Quaint Magnet Shop
Visit Us

GMT+8 hours, M-F:10am to 6pm

Double Sine : Biaxial Permanent Magnet Sine Table

Abbreviations and Conventions used Storewide

All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:

L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss

The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.

[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force] Use this text to share information about your product.

  • Ideal for high accuracy grinding, EDM & angle measurement operations.
  • This is suitable for high precision angle grinding on a grinding machine and so on.
  • Flat type for wide range of uses.
  • A positive locking device is mounted on the base.
  • Easy to use and a large effective area is provided for machining the works.
  • Constructed of hardened alloy tool steel.
  • Effective area of compound sine chuck is enlarged by employing the thin type  permanent magnetic chuck.
  • This increases the range of types usable by tilting works in length, breadth or composite angle.
  • Double way sine plate, can grind two way angle at the same time.
  • Angle precision: +5˚
    Parallelism: 0.002/100mm ex-Factory
    Angle Range: 0 - 45˚
  • Clamping Force: Up to 12 kg/cm2.
  • Select this product if you require angle grinding / machining of jobs over two axes

Datasheet

Have a question? Prefer a Quote?