Magna Rail : Versatile Rail Machining Electropermanent Magnet Clamp
Abbreviations and Conventions used Storewide
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.
[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force] Use this text to share information about your product.
Versatile Rail Machining Electropermanent Magnet Clamp
- High clamping force for rigid & uniform clamping.
- Accurate alignment of rail achieved.
- Complete rail machining in only 2 set-up.
- No vibration of Rails during machining operation.
- Increased tool life.
- High stock removal.
- Superior accuracies and finishing.
- Easy chips removal.
- Energy saving.
- Different Profiles of rails can be clamped on same Magnet using adapted pole
extensions. - Total face is accessible for machining.
- Select this product if you're looking for holding tools for the machining of rails
