Magna Mill 75 : 75mm Square Pole Electropermanent Magnet milling chuck
Abbreviations and Conventions used Storewide
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.
[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force]
- Square pole pattern Electropermanent magnets in standard construction of 75 mm square poles.
-
Alternative patterns of 47, 70 & 100 mm can be produced on special request to cater to specific requirements.
-
Holding force above 110 MT/SqM.
-
Perfect safety in case of power failure. No electricity is needed to keep the magnetic chuck ON.
-
Uniform clamping over the entire area, with no chattering of tools. Improves finish and tool life.
- Equipped with QR Code tag for FOC access to EZTrak Asset Management system for downloading quickstart guide, manuals, drawings and log service calls.
- Select this model if you desire versatile and flexible, high-powered clamping systems for your milling applications for small to large components of thicknesses from 15 mm upwards
Datasheet
