Magna Mill 50 : 50mm Square Pole Electropermanent Magnet milling chuck
Abbreviations and Conventions used Storewide
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.
[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force]
- Square pole pattern Electropermanent magnets in standard construction of 50mm.
- Alternative patterns of 47, 65, 70, & 100 mm can be constructed on special request to cater to specific requirements.
- Holding force above 80 MT/SqM.
- Perfect safety in case of power failure. No electricity needed to keep the Magnetic chuck ON.
- Uniform clamping over the entire area, no chattering of tools. Improves finish and tool life.
- Equipped with QR Code tag for FOC access to EZTrak Asset Management system for downloading quickstart guide, manuals, drawings and log service calls.
-
Select this model if you desire versatile and flexible, high-powered clamping systems for your milling applications for small to large components of thicknesses from 8 mm upwards
Datasheet
