Skip to content

Country

Our fulfilment service will be on hold between November 28th to Dec 4th, '24 due to the BFCM sale rush. While we will still take orders but deliveries will only commence from Dec 5, '24.
Our fulfilment service will be on hold between November 28th to Dec 4th, '24 due to the BFCM sale rush. While we will still take orders but deliveries will only commence from Dec 5, '24.
Click to Whatsapp

Operating extended hours on Whatsapp. No calls.

Ringing Telephone Icon
Click to Call

Follow GMT+8 hours, M-F:10am to 6pm

Click to Email

Replies usually within 24 hours.

The Quaint Magnet Shop
Visit Us

GMT+8 hours, M-F:10am to 6pm

EPML-Rectangular Module - Electropermanent rectangular lifting magnet module

Abbreviations and Conventions used Storewide

All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:

L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss

The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.

[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force]

  • Single units of these Lifting modules are combined to lift medium to long strictly rigid loads of billets, bars, beams, tubes and other solid loads with a firm and clear contact to magnet face
  • Pole design and orientation depends on nature of load to be lifted
  • Single units available in various safe lifting capacities from 500Kg, to 5000 Kgs
  • Compact, low weight, high strength and reliable with full adherence to industrial safety with 3 times Safety factor
  • Single control system to control multiple modules of suitable capacity in each spreader
  • If you are a Crane supplier with your own fabrication capability, you can opt to build your own Electropermanent lifting system by integrating several units of this module into your spreader

      Datasheet

       

      Have a question? Prefer a Quote?