![ElectroMicro - Microfine Pole Electromagnet Chuck - Supreme Magnets](http://suprememagnets.com/cdn/shop/products/electromicro-microfine-pole-electromagnet-chuck-894433_500x500.png?v=1691136049)
ElectroMicro - Microfine Pole Electromagnet Chuck
Abbreviations and Conventions used Storewide
All Dimensions are in Metric Scale (mm); Conventions and abbreviations used throughout the Store:
L : Length | OD : Outer Dia | ID : Inner Dia | W : Width | H : Height | T : Thickness (also Height) | CS : Countersunk | G : Gauss
The terms Force or Pull Force are used interchangeably throughout the store and refer to the maximum observable or tested force against a 10mm thick grinded finish mild steel plate. The pull force will depreciate with thinner plates or sheets. The Pull force or Force is expressed in lbs, Kg or N.
[10N (Newtons) = approx 1 Kg = approx 2.2 lbs Pull Force]
-
Ideal for thin components and for precision grinding.
-
The low magnetic flux does not interfere with the grinding operation thereby giving higher accuracy.
- All metal brass and steel laminated top plate.
- High resistance to coolant and corrosion.
- High mechanical rigidity and proven robustness.
- 100% water proof.
- Top plate is machinable up to 8 mm.
- Clamping force up to 12 kg/cm2 for large components.
- Pole pitch of 0.5mm (B) + 1.5mm (S) and low magnetic field height of 4mm.
-
Select this model if you require adequate holding power for thin to medium components in non-submerged machining applications on medium to large machines