Smart Products Filter Index - Do not delete

12mm L x 12mm W x 3mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 7.91 lb. / 3.59 Kg pull force Magnetized through 3mm H Surface Gauss approx...

12mm cube Grade N52 Ni-Cu-Ni triple coated Approx. 20.26 lb. / 9.19 Kg pull force Magnetized through 12mm H Surface Gauss approx. 6562 G

10mm L x 10mm W x 5mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 9.74 lb. / 4.42 kg pull force Magnetized through 5mm H Surface Gauss approx...

100mm L x 50mm W x 25mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 516.7 lb. / 234.4 kg pull force Magnetized through 25mm H Surface Gauss a...

100mm L x 50mm W x 12mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 181.2 lb. / 82.19 kg pull force Magnetized through 12mm H Surface Gauss a...

100mm L x 25mm W x 25mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 304.8 lb. / 135.25 kg pull force Magnetized through 25mm H Surface Gauss ...

100mm L x 12mm W x 12mm H block Grade N52 Ni-Cu-Ni triple coated Approx. 88.08 lb. / 39.95 kg pull force Magnetized through 12mm H Surface Gauss a...

Flat type for a wide range of uses. Ideal for high accuracy grinding operations, and EDM operations. Measurement of Angle accuracy. A positive loc...

Ideal for thin components and for precision grinding. The low magnetic flux does not interfere with the grinding operation thereby  giving high...

Ideal for standard components and for precision grinding. The low magnetic flux does not interfere with the grinding operation thereby giving high...

Clamps ferromagnetic Rings on vertical and horizontal turning lathes. Radially movable location blocks help to position and secure workpieces (be...

Suitable for medium and big components for grinding, lathe and even special milling operations. Steel and brass laminated top plate. Fully ext...

Round permanent magnet chuck for grinding Steel and brass laminated top plate Fully extended poles- minimum loss of working area Standard A...

Easy grip powerful magnet with handle to carry loads not safe for bare hand carrying. Can lift/drag top sheet from stack for pulling out without a...

Simple, easy, flexible, economical and very light weight. Can swivel 160° and lift sheets vertically and Horizontally. Optimum flux density effect...

Safety Factor ~ 3.5 :1 Proof load ~ 3.5 times declared SWL Capacity under ideal conditions Popular model, state-of-the-art design, compact dimensi...

Safety Factor ~ 3 :1 Proof load ~ 3 times declared SWL Capacity under ideal conditions Popular model, state-of-the-art design, compact dimensions ...

Safety Factor ~ 3.5 :1 Proof load ~ 3.5 times declared SWL Capacity under ideal conditions Very popular model, state-of-the-art design, compact d...

Ideal for disc and ring shaped components. Powerful and most suitable for components of all sizes for grinding and light turning. Made with c...

Handle grip, ergonomic, convenient ON/OFF switch & safe lifting solution New two pole design for flat and round loads Lightweight at 4 Kgs a...

EPML-Slab series employs the dynamic Electro Permanent magnet technology which generates a consistently powerful magnetic flux at a controlled dep...

Single units of these Lifting modules are combined to lift medium to long strictly rigid loads of billets, bars, beams, tubes and other solid load...

Handles single steel plates upto 12-14 Mtr long in a vertical orientation, the main purpose of which is to conserve expensive space by stacking p...

Essential building block for a best-selling product. Multiple units of this module combine to make the popular EPML-PLATE system for single plate ...